Yamaha DGX-640 Phono Jack Hack and Easel Upgrade » Yamaha_DGX-640_Phono_Jack_Hack.Still003

Then welded a 3 inch tube at 30 degrees to the T.

Then welded a 3 inch tube at 30 degrees to the T.

I welded a T from strap steel and riveted it to the plastic easel.
A bent rod inserts into the tube so the easel can swing out of the way.

This entry was posted on Saturday, December 22nd, 2012 at 1:25 am and is filed under . You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Leave a Reply

Visit Our Sponsor: MROSupply.com - An e-commerce site of Mechanical Drives & Belting