Video, photos and links below…

GE WHDSR209D2WW

Here is a great video on how to replace the Transmission and Brake Assembly
http://www.appliancepartspros.com/ge-transmission-and-brake-wh38x10002-ap2046402.html

You will really need this Spanner wrench!
Clothes Washer Wrench w/ Adapter – TB123A

Bearing 6205-2RS-1
The ‘-1’ is important, it means 1 inch inner diameter

If you damage or lose the spiral retention springs I have been told these fit this machine. J&E WRIST PIN RETAINER SPIRAL 1.081 IN. DIAMETER .042 IN. THICK # 990-042-CS $2.50 for 1 from Pit-Stop-Gang on ebay.

GE WH02X10032 Tub Seal
This is the tub seal I used in my washer repair video to fix the top loading GE washer.

You should always install a new tub seal!
Make sure to put the tub seal in using
Permatex 20539 Indian Head Gasket Shellac Compound
Use lots on seal to tub, not seal to shaft.
This will help keep the seal from leaking between the tub and seal.

Blaster 16-PB Penetrating oil
Put this on some stuck or rusted nuts and let soak for an hour or overnight. Must nuts and bolts will come right off! Way better than simple WD-40.

Photo Gallery

CLICK PHOTO for gallery view and click a SECOND time for hi-resolution image. Click thumbnails on lower right and lower left of gallery to navigate gallery photos.