7th November
written by Todd Harrison

Simple dash light repair to replace small expensive dash light bulbs using blue LED and a 680 ohm 1/4 watt inline restore soldered directly to the circuit traces on the dash board electronics.

Comments Off on LED Dash Light Repair in Ford F 150 PickupTruck
2nd November
written by Todd Harrison

In this (part 4) video I show how to setup your Grandfather Clock in beat and in regulation so that it keeps perfect time.

Bonus video on how to remove and install drive chains for your weights.

Bonus video on how to Setting a Grandfather Clock Hour and Quarter Hour Chime Gear Trains.

Link to my first video on this grandfather clock

Link to my test Stand build and hammer refurbish video

Link to part 1 (Examine clock)

Link to part 2a (Disassemble clock)

Link to part 2b (Clean clock)

Link to part 3 (Oil clock).

Link to part 4 (Setup clock).


Comments Off on How To Setup A Grandfather Clock In Beat and Regulation To Keep Correct Time – part 4
23rd October
written by Todd Harrison

In this video I show how I prepared my 1979 Bally Star Trek pinball machine play field for an automotive clear coat job.
It turned out real good and the job cost ~$125
I had the clear coat done by:

  • Elite Automotive Finishes
  • 1045 W. Broadway Road, Mesa, Arizona 85210
  • http://www.eafinishes.com/
  • eafinishes + @ + hotmail.com

Photo Gallery

CLICK PHOTO for gallery view and click a SECOND time for hi-resolution image. Click thumbnails on lower right and lower left of gallery to navigate gallery photos.


Comments Off on Pinball Machine Play Field Automotive Clear Coat Job
  • This sponsor link is for sale. Contact ToddRHarrison (@) gmail.com